Like the rest of your home, your outside foundation requires care to maintain it in peak form. Painting is with the remainder of your house your external foundation in timing. In this case, you can take the painting services from a commercial painting company.
Each five to 10 years, Pros recommends painting based upon your weather and your prior paintwork quality. The external foundations are depending on the age, style, and location of your property. But in this essay, we will focus on those in brick, cement block, and concrete.
As DIY tasks go, the painting of your external basis is very straightforward. Let’s break it down. So, before you look for residential commercial painting services, let’s begin!
First Step: Inspect It
Walk around your house before you pull the sprayer and paint. Inspect the base for crack, brick or damaged cement, piled up leaves, and anything else you need to cover before painting.
Separate them before you paint if you find cracks or bricks damaged. Remove any obstructions like house piling leaves, bushes, or dirt.
Second Step: Clean It Up
It is time to clean up once you have done your examination, carried out repairs, and eliminated obstacles. Use low tubing or a power washer to rinse it out.
But, do not use high power, as the foundation might be damaged. Use a wire brush to scrape out any dirt, plant substance, or other residues after this is done. Let this dry, then.
Third Step: Prime It
Brush out your sprayer because you really won’t do the trick using a paintbrush or a roller. The sprayer delivers a fast, flat coating when painting your external foundation.
Paints and rollers take a while, and instead of remaining on the surface, the paint absorbs. Use your foundation type with a first. Protect the soil and ground plantations from the house with clothing plates or plastic.
Tap any windows or doors of the cellar and cover them. On a cardboard part or old drywall till you hang the method unless you have never used a sprayer before.
Here are some more tips about spraying and covering as you go:
- Start a stroke and maintain the stroke after you release the trigger before you pull the trigger.
- Too much paint will not be constructed on the surface.
- Paint at speed equal to the coverage.
- Spray directly to the foundation, not at a sharp angle
- Wipe the tip of your sprinkler frequently so that the paint is blocking.
Fourth Step: Paint It
It’s time to paint when your primer is dry. Follow the same approach as with the first, paint smoothly and evenly, start from the corners, and then move from top to bottom of the foundation. Let the first coat dry, and then make another coat.
Two coats offer excellent coverage in most situations. But if a lighter one is covering a deeper color or if you can still see the base through the paint, apply another one or two until you achieve the coverage you want to protect.
